Bridge features many easy, robust ways to get user data into your Bridge instance. One way that moves user data management closer to automation is Auto CSV. There are many ways on the client side to configure Auto CSV according to the technical ability and resources available to the client. The document should give you an idea of whats required to move toward Auto CSV configuration.
Bridge’s Auto CSV, on a predetermined schedule, goes to an SFTP; picks up a CSV; uploads the CSV to a temporary, secure location, then uses a pre-mapped format, and then uploads the CSV into the system. This CSV is treated as the "Master Record" for the Bridge instance, meaning that Bridge reflects exactly what is contained in the CSV that is picked up by Auto CSV.
- If a UID that Bridge has not been uploaded previously appears on the CSV, a new user account for that UID is created.
- If a UID that Bridge has uploaded previously appears on the CSV but with changes to the user attributes (any field around the UID in the line for a user), Bridge will update that user.
- If a UID that Bridge has previously uploaded (including any that had been uploaded by manual CSV or one-off addition) is not found in the CSV, Bridge will terminate that user.
- If a UID that Bridge had terminated previously appears in the CSV, Bridge will restore the user, including the enrollments at the time that the user had been terminated. If the user’s attributes have changed or group logic has changed since the user was terminated, Bridge will update the user’s enrollments to reflect the current group logic.
- If a UID that Bridge has created previously with no updates to the attributes of that learner, Bridge will ignore that learner and make no changes.
- If a UID appears twice in the CSV, Bridge will ignore the second line where the duplicate UID appears (regardless if the user attribute data for the second record is different).
- If an email is improperly formatted (contains illegal characters, does not contain an “@” or a “.xyz”), Bridge will ignore these lines.
Because of this logic, Bridge turns off all ability through the user interface to add, remove, or modify users through manual action since Auto CSV will come behind the manual modification and undo any changes. This means the disabling of:
- one-off addition,
- add via manual CSV upload (including modifying users via CSV)
- remove via manual CSV upload, and
- edit users' one-off through the user profile pages.
Admins still have the ability to populate a group with a CSV, which will map the UIDs of the CSV with learners existing in the system and load them into the group. Admins also still have the ability to map users to a course via CSV or to a program via CSV.
If an admin would like to add additional user attributes by adding additional columns to the CSV after the initial mapping, an implementation consultant or support agent must remap the CSV to include the new fields. Users can be added independent of any intervention from Bridge.
- An SFTP protocol web-hosted server hosted by the client (FTP or other formats cannot be configured).
- A live CSV in the SFTP folder containing the intended user attribute columns. This CSV must maintain the same name over time.
- Required Field:
- This CSV must contain UIDs, meaning a field that is intended to be the login. This field cannot contain duplicate entries.
- Suggested Field:
- An email address field. The email address should be correctly formatted (not containing illegal characters and contains an @ and a .xyz
- Optional Fields:
- Other fields like first name, last name, department, job title, manager unique identifier, location, etc.
- Required Field:
- The hosting location.
- The login and corresponding password information for Bridge to access SFTP.
- Any unique ports leveraged by the SFTP.
- The file location of the CSV (if there are multiple folders being hosted on the SFTP).
- Admin access to the SFTP (or automation for depositing the CSV).
- Configure an SFTP and create a login for Bridge with a password.
- Deposit a live user data CSV into the SFTP.
- Send support, or your implementation consultant, if you have one, the hosting location, login, password, and any unique ports.
- Once set up, you will be informed that you can now map the file, which will prompt a sync once done.
Long Term Use
Once the CSV has been configured you'll see a new modal on the Admin > Tools > Auto CSV page. Note that this modal will be viewable by all admins of the account (but note, not to any subaccounts).
This modal will allow you to:
- Contact support for help.
- See the last time the CSV upload was completed (including a forced sync) or if there was an error in the CSV.
- Force a manual sync.
- Map the file if there are any changes.
- See what happened in the last CSV upload.
- See and modify the days the Auto CSV will run.
- See the hour Auto CSV will initiate.
|What You’re Experiencing
|The Potential Problem
|Steps to Resolve
All of my users are gone,
my Auto CSV modal says the last sync was successful.
Since your CSV is the master, your CSV is likely empty. Check your SFTP to confirm that the CSV contains the UIDs of your learners.
Confirm if your file is truly blank; if it is immediately notify the Support team. There is a system in place to block this from occurring it will fail the import if more than 20% of the users are being removed.
|One or two users are not in Bridge that should be.
The CSV likely does not contain the UID of those learners.
|One or two users are in Bridge that should not be.
|These users are likely Account Admins, this role will prevent users from being removed when the sync occurs
|Go into the users section and search for the user, use the ‘modify roles’ option to confirm they are not an Account Admin; if they are remove that role, if they are not and they remain contact the Support team.
|The Auto CSV modal notifies me that there was an error in the last upload.
There is no CSV in the SFTP,
the CSV has been renamed,
the CSV cannot be accessed (either the file itself or the SFTP).